AudioCodes MediaPack 114 Uživatelský manuál stáhnout pdf (Strana 108)

SIP User's Manual 108 Document #: LTRT-65411

MediaPack Series

Parameter Description

Use Display Name as

Source Number

[UseDisplayNameAsSou

rceNumber]

Determines the use of Source Number and Display Name for IP-to-Tel

calls.

 [0] No = If IP Display Name is received, the IP Source Number is

used as the Tel Source Number and the IP Display Name is used as

the Tel Display Name. If no Display Name is received from IP, the

Tel Display Name remains empty (default).

 [1] Yes = If an IP Display Name is received, it is used as the Tel

Source Number and also as the Tel Display Name, and Presentation

is set to Allowed (0). If no Display Name is received from IP, the IP

Source Number is used as the Tel Source Number and Presentation

is set to Restricted (1).

For example: When 'from: 100 <sip:200@201.202.203.204>' is

received, the outgoing Source Number and Display Name are set to

'100' and the Presentation is set to Allowed (0).

When 'from: <sip:100@101.102.103.104>' is received, the outgoing

Source Number is set to '100' and the Presentation is set to Restricted

(1).

Enable Contact Restriction

[EnableContactRestricti

on]

Determines whether the device sets the Contact header of outgoing

INVITE requests to ‘anonymous’ for restricted calls.

 [0] = Disabled (default)

 [1] = Enabled

Play Ringback Tone to IP

[PlayRBTone2IP]

Determines whether or not the device plays a ringback tone (RBT) to

the IP side of the call (IP-to-Tel calls).

 [0] Don't Play = Ringback tone isn't played (default).

 [1] Play = Ringback tone is played after SIP 183 session progress

response is sent.

Notes:

 This parameter is applicable only to FXS interfaces.

 To enable the device to send a 183/180+SDP responses, set

EnableEarlyMedia to 1.

 If EnableDigitDelivery = 1, the device doesn't play a ringback tone to

IP and doesn't send 183 or 180+SDP responses.

Play Ringback Tone to Tel

[PlayRBTone2Tel]

Determines the method used to play a ringback tone to the Tel side.

 [0] Don't Play = Ringback tone isn't played.

 [1] Play Local = Ringback tone is played to the Tel side of the call

when 180/183 response is received.

 [2] Play According to Early Media = Ringback tone is played to the

Tel side of the call if no SDP is received in 180/183 responses. If

180/183 with SDP message is received, the device cuts through the

voice channel and doesn't play ringback tone (default).

Use Tgrp Information

[UseSIPTgrp]

Determines whether the SIP 'tgrp' parameter, which specifies the Hunt

Group to which the call belongs is used, according to RFC 4904.

For example:

INVITE sip::+16305550100;tgrp=1;trunk-

[email protected].0.3;user=phone SIP/2.0

 [0] Disable = The 'tgrp' parameter isn't used (default).

 [1] Send Only = The Hunt Group number is added to the 'tgrp'

parameter value in the Contact header of outgoing SIP messages. If

a Hunt Group number is not associated with the call, the 'tgrp'

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 389 390

Komentáře k této Příručce

Žádné komentáře

AudioCodes MediaPack 114 Uživatelský manuál Strana 108

Komentáře k této Příručce

Související produkty a manuály pro Brány / ovladače AudioCodes MediaPack 114