AudioCodes Mediant 2000 Uživatelský manuál stáhnout pdf

6.00A.020.002 - AudioCodes Mediant 2000 SIP Digital Gateway

1 Important Notes

 Check the SIP 3

Party Validation Website for current validation status. The

SIP 3

Part Validation Website can be viewed at:

 http://testlab.inin.com or http://testlab.vonexus.com

 It is recommended to make basic changes to the I3 supplied .ini file then

utilize the web interface for further configuration.

 As this unit is a critical piece of the SIP infrastructure, it is highly

recommended that DHCP not be used. A static IP address is the preferred

method and is how the unit was configured during validation.

 After a factory reset, the Mediant 2000 will default to G.729 as its primary

codec

 The option for clock master is not exposed in the web interface. The settings

in the I3 supplied .ini file are to derive clock from the PSTN connection.

Should the internal oscillator be required, refer to INI Parameters Section of

this document, specifically the TDMBusClockSource, ClockMaster and

ClockMaster_x parameters.

 When using SRTP the number of available E1 channels is decreased. See

Security section 8 below.

2 Vendor Documentation

Documentation can be found on the CD shipped with the Mediant 2000.

3 Validated Firmware Version

V 6.00A.020.002

4 Install

Download the Mediant 2000 files from the Interactive Intelligence Testlab

website for the M2K:

http://testlab.inin.com/FeatureListPage.aspx?ProductType=1&ProductIDs=87

Contained in the zip file will be the validated version of firmware (.cmp), as

well as any supplemental configuration files, and a sample .ini file.

1 2 3 4 5

Shrnutí obsahu

Strany 1 - 4 Install

6.00A.020.002 - AudioCodes Mediant 2000 SIP Digital Gateway 1 Important Notes  Check the SIP 3rd Party Validation Website for current validation

Strany 2 - 5 Configuration

5 Configuration Methods:  Manipulation of the supplied .ini file, then uploading it via the web interface. This method is recommended for a qui

Strany 3

 Description of more significant .ini parameters. This is not a comprehensive list of all parameters found in the .ini file. A bold face parameter

Strany 4

 Significant .ini parameters continued: Parameter Description SipGatewayName Gateway Host Name. Used in host portion in the SIP address in the F

Strany 5 - 8 Security

7 Putback Transfer Select the Call Putback checkbox for the SIP line to enable the ability for the IC system to receive a call from the PSTN or a P

Další dokumenty pro Brány / ovladače AudioCodes Mediant 2000

Zobrazit dokument AudioCodes Mediant 2000 Instalační manuál

AudioCodes Mediant 2000 Instalační manuál (44 stránky)

Zobrazit dokument AudioCodes Mediant 2000 Uživatelský manuál

AudioCodes Mediant 2000 Uživatelský manuál (49 stránky)

Komentáře k této Příručce

Žádné komentáře

AudioCodes Mediant 2000 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Brány / ovladače AudioCodes Mediant 2000. 6.00A.020.002 - AudioCodes Mediant 2000 SIP Digital Uživatelská příručka

Shrnutí obsahu

Další dokumenty pro Brány / ovladače AudioCodes Mediant 2000

Komentáře k této Příručce

Související produkty a manuály pro Brány / ovladače AudioCodes Mediant 2000