AudioCodes MediaPack MP-124 Uživatelský manuál stáhnout pdf (Strana 15)

Configuration Note 3. Accessing the Device

Version 6.6 15 September 2013

3 Accessing the Device

The gateway includes an embedded Web server (Web interface) for device configuration,

providing a user-friendly graphical user interface (GUI).

Before you can configure the device, you first need to access it with the default VoIP /

Management LAN IP address (as described below) and then change this address to suit

the networking scheme in which your Enhanced Gateway is deployed.

3.1 Initial Access to the Device

To start configuring the device, you need to first access it with the default VoIP /

Management LAN IP address as shown in the table below.

PSTN Gateway Default IP Addresses

Device Name IP Address Subnet Mask

Mediant 3000

 TP-6310 or TP-8410 blade in Slot 1: 10.1.10.10

 TP-6310 or TP-8410 blade in Slot 3: 10.1.10.11 (HA mode)

255.255.0.0

Mediant 1000B 192.168.0.2 255.255.255.0

Mediant 800 192.168.0.2 255.255.255.0

 To initially access the PSTN gateway:

1. Connect to the first LAN port on the device directly to a PC, using a straight-through

Ethernet cable.

2. Ensure that your PC is configured with an IP address in the same subnet as the

gateway.

3. Open a standard Web browser, and then in the URL address field, enter the default

VoIP / Management LAN IP address (e.g., ''10.1.10.10'').

The following login screen appears, prompting you to log in with your login credentials:

Figure 3-1: Login Screen

4. Log in with the default, case-sensitive user name (''Admin'') and password (''Admin''),

and then click OK; the Web interface appears, displaying the Home page.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 97 98

Žádné komentáře

AudioCodes MediaPack MP-124 Uživatelský manuál Strana 15