AudioCodes MP-102 Uživatelský manuál stáhnout pdf (Strana 18)

MP-1xx/H.323

MP-1xx/H.323 User’s Manual 18 Document #: LTRT-00651

2.1.2 MP-10x Rack Mounting Installation

Figure 2-1: MP-10x Rack Mounting

The MP-10x is installed into a standard 19-inch rack by the addition of the 2 brackets supplied,

and shown above.

$ To install the MP-10x, take the following steps:

Step 1 Fasten the short bracket to the right-hand side of the MP-10x using the 2 screws

provided, as shown in Figure 2-1, and carefully positioning the peg into a convenient

ventilation hole in the side of the MP-10x box.

Step 2 Fasten the long bracket to the left-hand side of the MP-10x using the 2 screws

provided as shown in Figure 2-1, and carefully positioning the peg into a convenient

ventilation hole in the side of the MP-10x box.

Step 3 Insert the MP-10x into the 19-inch rack and fasten the left-hand and right-hand

brackets to the vertical tracks of the 19-inch rack, using standard 19-inch rack bolts

(not provided).

$ To connect the cables go to Step 4 (Section 2.1.4 on page 19)

2.1.3 MP-10x Desktop Mounting Installation

Figure 2-2: MP-10x Desktop or Shelf

The MP-10x is installed on a desk or shelf without additional brackets as shown above.

$ To connect the cables go to Step 4 (Section 2.1.4 on page 19)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 131 132

Žádné komentáře

AudioCodes MP-102 Uživatelský manuál Strana 18