AudioCodes Mediant 600 Instalační manuál stáhnout pdf (Strana 37)

Version 6.0 37 February 2010

Installation Manual 3. Configuring the Device

2. Configure routing of telephone calls (i.e., Tel or inbound IP) to an IP destination (i.e.,

IP address):

a. Open the ‘Outbound IP Routing’ page (Configuration tab > Protocol

Configuration menu > Routing Tables submenu > Tel to IP Routing).

Figure 3-4: Routing Tel Calls to IP

b. In the 'Src. Trunk Group ID' column, enter the Trunk Group number as defined in

Step 1.

c. In the 'Dest. Phone Prefix' column, enter "10" (i.e., prefix of dialed number).

d. In the 'Source Phone Prefix' column, enter the prefix of the channel's telephone

number as defined in Step 1.

e. In the 'Dest. IP Address' column, enter 10.33.24.14 (i.e., calls are sent to this IP

address).

f. Click Submit.

Therefore, any call whose dialed number prefix matches the value in the 'Dest. Phone

Prefix’ column (i.e., 10) and whose source phone number prefix matches the value in

the ‘Source Phone Prefix‘ column is sent to the IP address defined in the ‘Dest. IP

Address’ column.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Žádné komentáře

AudioCodes Mediant 600 Instalační manuál Strana 37