AudioCodes Mediant 600 Instalační manuál stáhnout pdf (Strana 23)

Version 6.0 23 February 2010

Installation Manual 2. Installing the Device

¾ To cable the FXS module's Lifeline:

1. Connect the Lifeline Splitter (supplied) to Port I on the device's FXS module.

2. Connect the Lifeline phone to Port A on the Lifeline Splitter.

3. Connect an analog PSTN line to Port B on the Lifeline Splitter.

The Lifeline splitter connects pins 1 and 4 to another source of an FXS port, and pins 2 and

3 to the POTS phone, as shown in the figure below.

Figure 2-12: RJ-11 Connector Pinouts for FXS Lifeline

Figure 2-13: Analog PSTN Lifeline Cabling Setup

Notes:

• Analog Lifeline is supported only by the FXS modules.

• The Lifeline feature activated upon network failure can be disabled using

the LifeLineType ini file parameter (described in the device's User's

Manual).

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 51 52

Žádné komentáře

AudioCodes Mediant 600 Instalační manuál Strana 23