AudioCodes MEDIAPACK VERSION 6.2 Instalační manuál stáhnout pdf (Strana 37)

Version 6.2 37 February 2011

Installation Manual 3. Configuring the Device

4. Change the device's IP address, by performing the following:

a. Open the ‘Multiple Interface Table’ page (Configuration tab > VoIP menu >

Network submenu > IP Settings).

b. Define the device's IP address, subnet mask, and default Gateway IP address (for

“OAMP + Media + Control” application type) so that they correspond to your

network IP scheme.

c. Click Apply.

d. Save your settings to the flash memory and reset the device (refer to 'Saving and

Resetting the Device' on page 44).

5. Disco

nnect your PC from the device or from the hub/switch (depending on the

connection method used in Step 1).

6. Reconnect the device and PC (if necessary) to the network.

7. Restore your PC’s IP address and subnet mask to their original settings. If necessary,

restart your PC and re-access the device via the Web interface with its newly assigned

IP address.

3.1.2 Assigning an IP Address Using BootP

You can assign an IP address to the device, using the supplied AudioCodes' BootP/TFTP

Server application.

Notes:

• BootP procedure can also be performed using any standard compatible

BootP server.

• For a detailed description of BootP, refer to the Product Reference

Manual.

¾ To assign an IP address using BootP:

1. Start the BootP application.

2. From the Edit menu, choose Preferences, and then in the 'Preferences' dialog box,

set the 'Timeout' field to 50.

3. From the Services menu, choose Clients; the 'Client Configuration' dialog box

appears.

4. Click the Add New Client

icon; a client with blank parameters is displayed.

5. In the ‘Client MAC’ field, enter the device's MAC address. The MAC address is printed

on the label located on the underside of the device. Ensure that the check box to the

right of the field is selected - this enables the client in the BootP tool (if the client is

disabled, no replies are sent to BootP requests).

6. In the ‘IP’ field, enter the IP address (in dotted-decimal notation) that you want to

assign to the device.

7. In the ‘Subnet’ field, enter the subnet mask (in dotted-decimal notation) that you want

to assign to the device. Ensure that the subnet mask is valid, otherwise, the device

may not function.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 57 58

Komentáře k této Příručce

Žádné komentáře

Marken	Top Modelle
RCA	LED24C45RQ RLED1530 LCD Scenium LCDX3022W	Andere Kategorien
Rolsen	RL-20S10 RL-17S10	Andere Kategorien
Radio Shack	16-972 LK-1161 63-255	Andere Kategorien
Runco	VL-46 CX-57HD	Andere Kategorien
Rackmount	LCDR7U19-03	Andere Kategorien
RJ Tech	RJ-100 DVRW	Andere Kategorien
RSL	Speedwoofer 10	Andere Kategorien
Rosewill	R918TV	Andere Kategorien
Roku	Streaming Stick	Andere Kategorien

AudioCodes MEDIAPACK VERSION 6.2 Instalační manuál Strana 37

Komentáře k této Příručce

LCD-Fernseher Handbücher

Beginnend mit R Seite

AudioCodes MEDIAPACK VERSION 6.2 Instalační manuál Strana 37

Komentáře k této Příručce

Související produkty a manuály pro Sítě AudioCodes MEDIAPACK VERSION 6.2

LCD-Fernseher Handbücher

Beginnend mit R Seite